A Cottage with a tired porch, now all nice and tidy! The old porch looked a little used up to say the least
Rounded Bath Tubs Cladding
One of the more challenging job, when all is but straight… The tub cover was too small and not held in place at all. Just floating. Cladding with vertical tongue and groove and there you are, nice, clean and beautiful cover, just needs painting…
Work by Bib’ll Fix it.
In the past 3 years We haven’t stopped being busy, so busy that this website was neglected, well, here is a quick gallery of major projects in the past few years. I cover most trades except wall papering, plastering (large areas) and Slabbing…
New Project – Canopy over house main entrance
A new and interesting project has just been completed, the erection of a canopy over a house entrance. The build is made to measure and it can be made in any shape and size. Due to weather conditions to upper part could not be stained, but will have the same colour as the side bannister …
Bespoke bedroom wardrobe
A recent job in Dunblane. new wardrobe on he end of a room, the final product has sliding doors…
Kitchen refurbishment
A kitchen refurbishment, at a property in Fallin, new worktops all round. as well as new sink and new tap.
Shed roof
Another new client in Dunblane has some leaks in his shed, the likely reason was that water was blowned in underneath the felt. Solution: a little bit of Sitcks Like Sh*t did the trick! One can see in the picture below the water clearly coming up the shallow slanted roof and into the ceiling. With …
More fence work – kind of…
Today I made a new garden door! Parts were stained prior to building the door. See pictures below for before and after…
Storm Damage
A new customer in Dunblane had his fence brought down due to the recent stormy weather which brought Gale force wind and Flooding in most of the country. The issue was fence posts that were sheared off at ground level. This client didn’t want to have a completely new fence rebuilt, so I suggested to …
Menstrie – Xpelair removal
Today a wee job in Menstrie, needed to remove an Xpelair fan that was faulty, the customer requested that I replace it with something to plug the hole, which has been done with two sheets of multi-plies wood panels padded with draught extruder rubber.